Winnerwell Flashing Kit Large

Winnerwell Flashing Kit Large

Essential for safe installation of a Winnerwell stove in your bell tent or shelter.

Designed to fit perfectly with the Triple-wall Heat Protector Chimney 3.5″, the Winnerwell® Flashing Kit Large is made from silicone which resists temperatures of up to 240℃ and is held in place by stainless steel rings with six wing nuts. The Flashing Kit Large can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.

WARNING: The Flashing Kit must be used with Triple-wall Heat Protector Chimney 3.5″. There is a risk of melting if the Flashing Kit is installed on stove pipe directly.

Specification:
Material                        Silicone collar and 304 Stainless Steel rings
Inner Diameter           150mm / 5.9 inches
Outer Diameter           260mm / 10.2 inches
Height                           112mm / 4.4 inches
Net Weight                   0.6kg / 1.3 lbs

Winnerwell Flashing Kit Large must be installed at the position below the 5th row of the holes on the Heat Protector Chimney. If there’s an installation angle, please make sure that the Silicone part of the Flashing Kit remains below the 5th row of these holes as well. We recommend to purchase Winnerwell® Short Pipes separately for height adjustment to meet the above specified position requirement.

WARNING: Temperature at the top part of the Heat Protector Chimney is high, the Silicone part must avoid being placed over the upper cooling holes.